rev.5.00, nov.12.2003, page 1 of 9 HD74ALVC1G32 2?input or gate rej03d0112?0500z (previous ade-205-607d (z)) rev.5.00 nov.12.2003 description the HD74ALVC1G32 has two?input or gate in a 5 pin package. low voltage and high-speed operation is suitable for the battery powered products (e.g., notebook computers), and the low power consumption extends the battery life. features ? the basic gate function is lined up as renesas uni logic series. ? supplied on emboss taping for high speed automatic mounting. ? supply voltage range : 1.2 to 3.6 v operating temperature range : ?40 to +85c ? all inputs v ih (max.) = 3.6 v (@v cc = 0 v to 3.6 v) all outputs v o (max.) = 3.6 v (@v cc = 0 v) ? output current 2 ma (@v cc = 1.2 v) 4 ma (@v cc = 1.4 v to 1.6 v) 6 ma (@v cc = 1.65 v to 1.95 v) 18 ma (@v cc = 2.3 v to 2.7 v) 24 ma (@v cc = 3.0 v to 3.6 v) ? ordering information part name package type package code package abbreviation taping abbreviation (quantity) HD74ALVC1G32vse vson-5 pin tnp-5dv vs e (3,000 pcs/reel)
HD74ALVC1G32 rev.5.00, nov.12.2003, page 2 of 9 outline and article indication ? HD74ALVC1G32 marking = control code a 4 vson-5 function table inputs ab output y lll hl h lhh hhh h : high level l : low level pin arrangement (top view) 5 4 v cc 1 2 3 in b in a gnd out y
HD74ALVC1G32 rev.5.00, nov.12.2003, page 3 of 9 absolute maximum ratings item symbol ratings unit test conditions supply voltage range v cc ?0.5 to 4.6 v input voltage range * 1 v i ?0.5 to 4.6 v ?0.5 to v cc + 0.5 output : h or l output voltage range * 1, 2 v o ?0.5 to 4.6 v v cc : off input clamp current i ik ?50 ma v i < 0 output clamp current i ok 50 ma v o < 0 or v o > v cc continuous output current i o 50 ma v o = 0 to v cc continuous current through v cc or gnd i cc or i gnd 100 ma maximum power dissipation at ta = 25c (in still air) * 3 p t 200 mw storage temperature tstg ?65 to 150 c notes: the absolute maximum ratings are values, which must not individually be exceeded, and furthermore no two of which may be realized at the same time. 1. the input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 2. this value is limited to 4.6 v maximum. 3. the maximum package power dissipation was calculated using a junction temperature of 150c.
HD74ALVC1G32 rev.5.00, nov.12.2003, page 4 of 9 recommended operating conditions item symbol min max unit conditions supply voltage range v cc 1.2 3.6 v input voltage range v i 03.6v output voltage range v o 0v cc v ??2 v cc = 1.2 v ??4 v cc = 1.4 v ??6 v cc = 1.65 v ? ?18 v cc = 2.3 v i oh ? ?24 v cc = 3.0 v ?2 v cc = 1.2 v ?4 v cc = 1.4 v ?6 v cc = 1.65 v ?18 v cc = 2.3 v output current i ol ?24 ma v cc = 3.0 v 020 v cc = 1.2 to 2.7 v input transition rise or fall rate ? t / ? v 010 ns / v v cc = 3.30.3 v operating free-air temperature ta ?40 85 c note: unused or floating inputs must be held high or low.
HD74ALVC1G32 rev.5.00, nov.12.2003, page 5 of 9 electrical characteristic ta = ?40 to 85c tem symbol v cc (v) * min typ max unit test condition 1.2 v cc 0.75 ? ? 1.4 to 1.6 v cc 0.7 ? ? 1.65 to 1.95 v cc 0.7 ? ? 2.3 to 2.7 1.7 ? ? v ih 3.0 to 3.6 2.0 ? ? 1.2 ? ? v cc 0.25 1.4 to 1.6 ? ? v cc 0.3 1.65 to 1.95 ? ? v cc 0.3 2.3 to 2.7 ? ? 0.7 input voltage v il 3.0 to 3.6 ? ? 0.8 v min to max v cc ?0.2 ? ? i oh = ?100 a 1.2 0.9 ? ? i oh = ?2 ma 1.4 1.1 ? ? i oh = ?4 ma 1.65 1.2 ? ? i oh = ?6 ma 2.3 1.7 ? ? i oh = ?18 ma v oh 3.0 2.2 ? ? i oh = ?24 ma min to max ? ? 0.2 i ol = 100 a 1.2 ? ? 0.3 i ol = 2 ma 1.4 ? ? 0.3 i ol = 4 ma 1.65 ? ? 0.3 i ol = 6 ma 2.3 ? ? 0.55 i ol = 18 ma output voltage v ol 3.0 ? ? 0.55 v i ol = 24 ma input current i in 3.6 ? ? 5 av in = 3.6 v or gnd quiescent supply current i cc 3.6 ? ? 10 av in = v cc or gnd, i o = 0 output leakage current i off 0??5 av i or v o = 0 to 3.6 v input capacitance c in 3.3 ? 2.5 ? pf v in = v cc or gnd note: for conditions shown as min or max, use t he appropriate values under recommended operating conditions.
HD74ALVC1G32 rev.5.00, nov.12.2003, page 6 of 9 switching characteristics v cc = 1.2 v ta = ?40 to 85c item symbol min typ max unit test conditions from (input) to (output) propagation delay time t plh t phl ?7.5?nsc l = 15 pf a or b y v cc = 1.5 0.1 v ta = ?40 to 85c item symbol min typ max unit test conditions from (input) to (output) propagation delay time t plh t phl 2.0 ? 7.0 ns c l = 15 pf a or b y v cc = 1.8 0.15 v ta = ?40 to 85c item symbol min typ max unit test conditions from (input) to (output) propagation delay time t plh t phl 1.5 ? 5.0 ns c l = 30 pf a or b y v cc = 2.5 0.2 v ta = ?40 to 85c item symbol min typ max unit test conditions from (input) to (output) propagation delay time t plh t phl 1.0 ? 3.7 ns c l = 30 pf a or b y v cc = 3.3 0.3 v ta = ?40 to 85c item symbol min typ max unit test conditions from (input) to (output) propagation delay time t plh t phl 1.0 ? 2.8 ns c l = 30 pf a or b y
HD74ALVC1G32 rev.5.00, nov.12.2003, page 7 of 9 operating characteristics ta = 25c item symbol v cc (v) min typ max unit test conditions 1.5 ? 10.5 ? 1.8 ? 10.5 ? 2.5 ? 10.5 ? power dissipation capacitance c pd 3.3 ? 11.5 ? pf f = 10 mhz test circuit pulse generator out z = 50 ? c l r l input output v cc l note: c includes probe and jig capacitance. v = 1.8 0.15 v cc r 1.0 k ? 2.0 k ? 500 ? l c 30 pf 15 pf 30 pf l v = 2.5 0.2 v, 3.3 0.3 v cc v = 1.2 v, 1.5 0.1 v cc symbol
HD74ALVC1G32 rev.5.00, nov.12.2003, page 8 of 9 input 90% 10% 10% v ih v oh v ol gnd t r v ref v ref v ref v ref t f 90% t plh t phl ? waveforms output v ref v ih v cc v cc t / t 2.0 ns 2.5 ns 2.5 ns rf 2.7 v 50% 50% 1.5 v v = 2.5 0.2 v cc v = 1.2 v, 1.5 0.1 v, 1.8 0.15 v cc v = 3.3 0.3 v cc symbol note: input waveform : prr = 10 mhz, duty cycle 50%
HD74ALVC1G32 rev.5.00, nov.12.2003, page 9 of 9 package dimensions 0.12 5 ? 0.2 1.6 0.05 1.2 0.1 0.2 0.2 1.6 0.05 0.6 max 0.5 0.5 1.0 0.1 package code jedec jeita mass (reference value) tnp?5dv ? ? 0.002 g unit: mm +0.1 ?0.05 (0.1) (0.1) +0.1 ?0.05
? 2003. renesas technolo gy corp., all ri g hts reserved. printed in japan . colo p hon 1.0 keep safet y first in y our circuit desi g ns ! 1. renesas technolo gy corp. puts the maximum effort into makin g semiconductor products better and more reliable, but there is alwa y s the possibilit y that trouble m a y occur with them. trouble with semiconductors ma y lead to personal in j ur y , fire or propert y dama g e . remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placem ent of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. notes regarding these materials 1. these materials are intended as a reference to assist our customers in the selection of the renesas technology corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to renesas t echnology corp. or a third party. 2. renesas technology corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. all information contained in these materials, including product data, diagrams, charts, programs and algorithms represents i nformation on products at the time of publication of these materials, and are subject to change by renesas technology corp. without notice due to product improvement s or other reasons. it is therefore recommended that customers contact renesas technology corp. or an authorized renesas technology corp. product distrib utor for the latest product information before purchasing a product listed herein. the information described here may contain technical inaccuracies or typographical errors. renesas technology corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. please also pay attention to information published by renesas technology corp. by various means, including the renesas tech nology corp. semiconductor home page (http://www.renesas.com). 4. when using any or all of the information contained in these materials, including product data, diagrams, charts, programs, a nd algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. renesas technology corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. renesas technology corp. semiconductors are not designed or manufactured for use in a device or system that is used under ci rcumstances in which human life is potentially at stake. please contact renesas technology corp. or an authorized renesas technology corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerosp ace, nuclear, or undersea repeater use. 6. the prior written approval of renesas technolo gy corp. is necessar y to reprint or reproduce in whole or in part these materials . 7 . if these products or technolo g ies are sub j ect to the japanese export control restrictions, the y must be exported under a license from the japanese g overnment and cannot b e imported into a countr y other than the approved destination. an y diversion or reexport contrar y to the export control laws and re g ulatio n s of japan and/or the countr y of destination is prohibited . 8. please contact renesas technolo gy corp. for further details on these materials or the products contained therein . s ales strate g ic plannin g div. nippon bld g ., 2-6-2, ohte-machi, chi y oda-ku, tok y o 100-0004, japa n htt p ://www.renesas.co m renesas technology america, inc. 450 holger way, san jose, ca 95134-1368, u.s.a tel: <1> (408) 382-7500 fax: <1> (408) 382-7501 renesas technology europe limited. dukes meadow, millboard road, bourne end, buckinghamshire, sl8 5fh, united kingdom tel: <44> (1628) 585 100, fax: <44> (1628) 585 900 renesas technology europe gmbh dornacher str. 3, d-85622 feldkirchen, germany tel: <49> (89) 380 70 0, fax: <49> (89) 929 30 11 renesas technology hong kong ltd. 7/f., north tower, world finance centre, harbour city, canton road, hong kong tel: <852> 2265-6688, fax: <852> 2375-6836 renesas technology taiwan co., ltd. fl 10, #99, fu-hsing n. rd., taipei, taiwan tel: <886> (2) 2715-2888, fax: <886> (2) 2713-2999 renesas technology (shanghai) co., ltd. 26/f., ruijin building, no.205 maoming road (s), shanghai 200020, china tel: <86> (21) 6472-1001, fax: <86> (21) 6415-2952 renesas technology singapore pte. ltd. 1, harbour front avenue, #06-10, keppel bay tower, singapore 098632 tel: <65> 6213-0200, fax: <65> 6278-8001 renesas sales offices
|
